Direct connection via VPN
- Thread starter vamp
- Start date
My team has one more question. Can you somehow run arp -a on the mobile (with VPN enabled) and let us know if you see the local network IP of the PC where Remotly server(s) is(are) running. If it's there then we will use arp IPs from the same local network to perform handshakes with all Remotly servers and use the server public IP and not ISP(VPN). The problem with Direct Connection in current version is that these public addresses are different (they should be the same).
well, i able to ping it.
I found a app that do a icmp ping (tcp) a ip range. it work, i able to ping my local network devices.
But it not arp of course...
Just a idea... The clients are know own internal addresses. Why not send it to each other via management server? and all connected devices are know each other IP adresses. If one of update, it send again via management server.
Android devices not need to send it, because they only clients.
I found a app that do a icmp ping (tcp) a ip range. it work, i able to ping my local network devices.
But it not arp of course...
Just a idea... The clients are know own internal addresses. Why not send it to each other via management server? and all connected devices are know each other IP adresses. If one of update, it send again via management server.
Android devices not need to send it, because they only clients.
Last edited:
@mirillis
hello there,
today i have a chance to test windows to windows connection (via VPN). and the problem is exactly same... But on windows, i able to make a arp command.
Interface: 100.86.85.58 --- 0x3e is the VPN interface. The ethernet interace are : Interface: 10.51.28.124 --- 0x11
The destination PC (that i want to connect it): 192.168.31.102
If i ping 192.168.31.102 after it avaliable via arp table:
hello there,
today i have a chance to test windows to windows connection (via VPN). and the problem is exactly same... But on windows, i able to make a arp command.
Interface: 100.86.85.58 --- 0x3e is the VPN interface. The ethernet interace are : Interface: 10.51.28.124 --- 0x11
The destination PC (that i want to connect it): 192.168.31.102
Code:
C:\WINDOWS\system32>arp -a
Interface: 10.51.28.124 --- 0x11
Internet Address Physical Address Type
10.51.28.100 00-00-5e-00-01-05 dynamic
10.51.28.161 cc-96-e5-a2-11-30 dynamic
10.51.31.239 00-50-56-97-ec-d0 dynamic
224.0.0.2 01-00-5e-00-00-02 static
224.0.0.22 01-00-5e-00-00-16 static
224.0.0.251 01-00-5e-00-00-fb static
224.0.0.252 01-00-5e-00-00-fc static
224.0.1.60 01-00-5e-00-01-3c static
239.255.255.250 01-00-5e-7f-ff-fa static
255.255.255.255 ff-ff-ff-ff-ff-ff static
Interface: 10.51.28.32 --- 0x15
Internet Address Physical Address Type
10.51.28.34 80-ee-73-e9-6d-51 dynamic
10.51.28.50 ac-91-a1-76-bc-b8 dynamic
10.51.28.100 00-00-5e-00-01-05 dynamic
10.51.28.161 cc-96-e5-a2-11-30 dynamic
10.51.31.239 00-50-56-97-ec-d0 dynamic
10.51.31.255 ff-ff-ff-ff-ff-ff static
224.0.0.2 01-00-5e-00-00-02 static
224.0.0.22 01-00-5e-00-00-16 static
224.0.0.251 01-00-5e-00-00-fb static
224.0.0.252 01-00-5e-00-00-fc static
224.0.1.60 01-00-5e-00-01-3c static
239.255.255.250 01-00-5e-7f-ff-fa static
255.255.255.255 ff-ff-ff-ff-ff-ff static
Interface: 192.168.92.1 --- 0x19
Internet Address Physical Address Type
192.168.92.255 ff-ff-ff-ff-ff-ff static
224.0.0.2 01-00-5e-00-00-02 static
224.0.0.22 01-00-5e-00-00-16 static
224.0.0.251 01-00-5e-00-00-fb static
224.0.0.252 01-00-5e-00-00-fc static
224.0.1.60 01-00-5e-00-01-3c static
227.1.2.3 01-00-5e-01-02-03 static
239.255.255.250 01-00-5e-7f-ff-fa static
255.255.255.255 ff-ff-ff-ff-ff-ff static
Interface: 172.17.160.1 --- 0x20
Internet Address Physical Address Type
172.17.175.255 ff-ff-ff-ff-ff-ff static
224.0.0.2 01-00-5e-00-00-02 static
224.0.0.22 01-00-5e-00-00-16 static
224.0.0.251 01-00-5e-00-00-fb static
224.0.0.252 01-00-5e-00-00-fc static
224.0.1.60 01-00-5e-00-01-3c static
227.1.2.3 01-00-5e-01-02-03 static
239.255.255.250 01-00-5e-7f-ff-fa static
255.255.255.255 ff-ff-ff-ff-ff-ff static
Interface: 192.168.109.1 --- 0x26
Internet Address Physical Address Type
192.168.109.255 ff-ff-ff-ff-ff-ff static
224.0.0.2 01-00-5e-00-00-02 static
224.0.0.22 01-00-5e-00-00-16 static
224.0.0.251 01-00-5e-00-00-fb static
224.0.0.252 01-00-5e-00-00-fc static
224.0.1.60 01-00-5e-00-01-3c static
227.1.2.3 01-00-5e-01-02-03 static
239.255.255.250 01-00-5e-7f-ff-fa static
255.255.255.255 ff-ff-ff-ff-ff-ff static
Interface: 100.86.85.58 --- 0x3e
Internet Address Physical Address Type
192.168.31.105 dynamic
192.168.31.106 dynamic
224.0.0.22 static
224.0.0.251 static
224.0.1.60 static
239.255.255.250 static
255.255.255.255 static
C:\WINDOWS\system32>If i ping 192.168.31.102 after it avaliable via arp table:
Code:
Interface: 100.86.85.58 --- 0x3e
Internet Address Physical Address Type
192.168.31.102 dynamic
192.168.31.105 dynamic
192.168.31.106 dynamic
224.0.0.22 static
224.0.0.251 static
224.0.1.60 static
239.255.255.250 static
255.255.255.255 staticHi vamp,
The team is working on it. But the solution will be rather advanced. There will be a dropdown list where you will be able to select which network interface should be used by the client during connection. We think this will be the most robust solution even if someone will have 4 network interfaces.
The team is working on it. But the solution will be rather advanced. There will be a dropdown list where you will be able to select which network interface should be used by the client during connection. We think this will be the most robust solution even if someone will have 4 network interfaces.